Commercial Garage Door Openers for Businesses in Western PA

LiftMaster Commercial Garage Door Openers

Trolley Openers

Trolley openers are typically used for standard lift sectional doors and are available in industrial, medium, and light duty.

LiftMaster Commercial Trolly Opener Model T — Industrial Duty Trolley Opener for standard lift sectional doors featuring a low profile and industrial ball bearings on the output shaft.

Standard Features:

  • Continuous-duty high-starting torque motor with instant reverse and overload protection. Available in 1/3, 1/2, 3/4 and 1 HP; single- or three-phase. Capacitor start on single-phase. Removable without affecting limit switch settings.
  • Drive reduction.
  • Emergency disconnect.
  • B2, C2, D1 and E2 wiring types are all standard and easily selectable using the Logic 3.0 Control Board (L).
  • Radio receiver and external radio control terminal.
  • Ball bearings on output shaft; heavy-duty, oil-filled bushings on reduction shafts.
  • Solenoid-actuated brake is standard on 3/4 and 1 HP units to prevent coasting of door. Optional on 1/3 and 1/2 HP units.
  • Friction clutch.
  • NEMA 1 type electrical box, heavy-duty 11-gauge steel frame with durable powdercoat finish, all reduction sprockets drilled and pinned to shafts.
  • Push button station.
  • Quick-mount header bracket.
  • High-strength dual L-rail track with exclusive nylon quiet-gliding chain.
  • 2-year warranty.

LiftMaster Commercial Trolley Opener Model MT — Medium Duty Trolley Opener for standard lift sectional doors featuring a high-starting torque motor, a compact design, quicker-gliding rail spacers and a quick-mount swivel header bracket. 

Standard Features:

  • 1/2 HP single-phase motor with instant reverse and internal automatic reset thermal overload.
  • Auxiliary reversal system.
  • C2 wiring providing momentary contact to open and stop, with constant contact to close.
  • Operator is pre-wired to accept a sensing device, photoelectric sensors, radio controls and most types of access control equipment.
  • High-strength dual L-rail track with exclusive nylon quiet-gliding chain guides on rail spacers for quiet, smooth operation.
  • Dependable dual relay system.
  • 24V NEC Class 2 control circuit.
  • Drive reduction.
  • Emergency disconnect.
  • Push button station.
  • NEMA 1 type electrical box, heavy-duty 11-gauge steel frame with baked-on powdercoat finish.
  • Heavy-duty oil-filled bearings.
  • External radio control terminal.
  • Friction clutch.
  • 2 year warranty.

Liftmaster Commercial Trolley Opener Model ATS211X — Light Duty Trolley Opener for standard lift sectional doors up to 14 feet high, rated for 8 cycles per hour.

Standard Features:

  • 1/2 HP single-phase motor with instant reverse and automatic reset thermal overload.
  • Automatic safety reverse/automatic door stop.
  • The Protector System non-impact infrared safety device.
  • Security+ anti-burglary coding radio receiver. (Transmitters and keyless entry available).
  • Manual release in case of power failure. A push of the button automatically reconnects the door and operator.
  • Maximum run timer.
  • Heavy-duty I beam configured trolley track.
  • Push button station.
  • Automatic light delay.
  • 1 year warranty
Hoist Openers

Hoist openers are designed for use on rolling doors and grilles, as well as industrial sectional doors with high or vertical lift.

LiftMaster Commercial Hoist Opener Model H — Industrial Duty Hoist Opener featuring a continuous-duty high-starting torque motor, a universal-mount frame design, industrial ball bearings on the output shaft and an emergency chain hoist with an electric interlock.

Standard Features:

  • Continuous-duty high-starting torque motor with instant reverse and overload protection. Available in 1/3, 1/2, 3/4 and 1 HP; single- or three-phase. Capacitor start on single phase. Removable without affecting limit switch settings.
  • Drive reduction.
  • Emergency manual operation.
  • B2, C2, D1 and E2 wiring types are all standard and easily selectable using the Logic 2.0 Control Board (L).
  • Operator is pre-wired to accept a sensing edge, photoelectric sensors, radio controls and most types of access control equipment.
  • External radio control terminal.
  • Positive locking mechanical brake system.
  • Friction clutch.
  • Industrial ball bearings on a 1″ output shaft; heavy-duty, oil-filled iron bearings on reduction shafts.
  • 24V NEC Class 2 control circuit.
  • NEMA 1 type electrical box, heavy-duty 11-gauge steel frame with durable powdercoat finish, all reduction sprockets drilled and pinned to shafts.
  • Push button station.
  • 2 year warranty.

LiftMaster Commercial Hoist Opener Model MH — Medium Duty Hoist Opener featuring an adjustable friction clutch, a standard solenoid brake, a high-starting torque motor, a compact design and an emergency chain hoist with an electric interlock.

Standard Features:

  • 1/2 HP powerful motor, 115V single-phase with instant reverse and internal automatic reset thermal overload.

  • Dependable dual relay system (NEMA 1 enclosure).

  • 24V NEC Class 2 control circuit.

  • Emergency manual operation.

  • Heavy-duty solenoid actuated brake.

  • C2 wiring providing momentary contact to open and stop with constant contact to close.

  • Operator is pre-wired to accept a sensing device, photoelectric control, radio controls and most types of access control equipment.

  • Drive reduction.

  • Heavy-duty oil-filled bearings.

  • Push button station.

  • NEMA 1 type electrical box, heavy-duty 11-gauge steel frame with baked-on powdercoat finish, all reduction sprockets drilled and pinned to shafts.

  • External radio control terminal.

  • Friction clutch.

  • 2 year warranty.

Jackshift Openers

Jackshaft openers are designed for use on rolling grilles and shutters, as well as rolling doors. Some openers are also designed for use on industrial sectional doors with high or vertical lift.

LiftMaster Commercial JackShaft Opener Model J — Industrial Duty Jackshaft Opener featuring a removable hinged electrical box cover, a continuous-duty high-starting torque motor, industrial ball bearings on the output shaft and a universal mount frame design.

Standard Features:

  • Continuous-duty high-starting torque motor with instant reverse and overload protection. Available in 1/3, 1/2, 3/4 and 1 HP; single- or three-phase. Capacitor start on single phase. Removable without affecting limit switch settings.
  • Drive reduction.
  • Emergency manual operation.
  • B2, C2, D1 and E2 wiring types are all standard and easily selectable using the Logic 2.0 Control Board (L).
  • Operator is pre-wired to accept a sensing edge, photoelectric sensors, radio controls and most types of access control equipment.
  • External radio control terminal.
  • Positive locking mechanical brake system.
  • Friction clutch.
  • Industrial ball bearings on a 1″ output shaft; heavy-duty, oil-filled iron bearings on reduction shafts.
  • 24V NEC Class 2 control circuit.
  • NEMA 1 type electrical box, heavy-duty 11-gauge steel frame with durable powdercoat finish, all reduction sprockets drilled and pinned to shafts.
  • Push button station.
  • 2 year warranty.

LiftMaster Commercial JackShaft Opener Model MJ — Medium Duty Jackshaft Opener featuring a compact design, an adjustable friction clutch, a standard solenoid brake and a high-starting torque motor.

Standard Features:

  • 1/2 HP powerful motor, 115V single-phase with instant reverse and internal automatic reset thermal overload.

  • Dependable dual relay system (NEMA 1 enclosure).

  • 24V NEC Class 2 control circuit.

  • Floor level disconnect.

  • Heavy-duty solenoid actuated brake.

  • C2 wiring providing momentary contact to open and stop with constant contact to close.

  • Operator is pre-wired to accept a sensing device, photoelectric sensors, radio controls and most types of access control equipment.

  • Drive reduction.

  • Push button station.

  • NEMA 1 type electrical box, heavy-duty 11-gauge steel frame with baked-on powdercoat finish, all reduction sprockets drilled and pinned to shafts.

  • External radio control terminal.

  • Friction clutch.

  • 2 year warranty.

LiftMaster Commercial Jackshaft Opener Model 3900 — Model 3900 is a light duty jackshaft opener for light-duty commercial sectional applications only. It features a compact design ideal for limited height, cathedral, or obstructed ceiling installations. It may be used on standard and high-lift (maximum 7 ft. high-lift) sectional doors measuring up to 14 ft. high and up to 18 ft. wide, but not exceeding 180 sq. ft. or 650 lbs.

Standard Features:

  • Heavy-duty 24V DC motor provides ultra-quiet operation, along with variable speed smooth start and stop.
  • Ideal for limited height, cathedral, or obstructed celing installations; mounts mounts on the left or right side of door and attaches to the torsion bar.
  • 1-button station for OPEN & CLOSE functions with type B2 control wiring is standard for all operators. Controls with 1, 2 and 3 buttons are available.
  • The Protector System: A non-contact photo safety sensor designed to sense an obstruction and signal the door operator to reverse to open.
  • Lifetime motor warranty.

Dependable Commercial Garage Door Openers for Local Business Owners

Rely on the experts at Alliance Garage Doors & Openers in Greensburg, PA, to provide western PA with dependable garage door products and services. As your one-stop garage door-stop, we sell, install, and service garage doors and virtually any type of garage door accessory. Our commercial garage door openers are strong, reliable, and cost-effective. We offer chain drive, belt drive, and residential jackshaft operators for high-lift door applications. We also a full line of garage door opener accessories, and all of our operators are equipped with WiFi to access your garage door opener remotely. Contact us now at (724) 836-2522 to schedule a garage door or accessory installation from our team of experts!

Enjoy the Convenience of a Reliable Garage Door Opener

Business owners and employees would appreciate not having to lift large, heavy garage doors for trucks, shipments, etc. In fact, any commercial customer in the area can benefit greatly from a reliable garage door opener for their overhead doors. At Alliance Garage Doors & Openers, the proof is in the name. We provide excellent garage door and garage door openers and all the services that come along with it. Call today to have a garage door opener installed, and enjoy the convenience of the latest technology!

Benefits of a Commercial Garage Door Opener

There are many benefits and advantages to installing a garage door opener on your overhead doors for your business:

Safe & Secure: remote operation gives you complete control over when your garage door opens and closes, even when you’re not close to it. Entrance codes also add extra security to your business, allowing you to record who has opened the door and when.

Convenient: you and your employees can enter and exit the property quickly safely.

Sound Investment: investing in an automatic garage door opener will save you the hassle and daily costs of operating without one. You can rest assured that your investment will last for years if provided and installed by Alliance!